This directory contains the video tutorials from the pspseq youtube page here:

http://www.youtube.com/view_play_list?p=AAB442BCA7F841C4

They have been encoded into a format that plays well on the PSP.  The
big advantage to watching on youtube is that I pretty heavily use annotations
to help give some additional details, but this is a nice way to bring
all the tutorials with you.  I've included all the detailed info
on each tutorial below.

I played these videos on my PSP using PSPlayer.  It can be downloaded here:

http://dl.qj.net/PSPlayer-2.0-PSP-Homebrew-Applications/pg/12/fid/24022/catid/151

Enjoy!

Ethan

________________________________________________________________________________	
PSPSeq 3.01 tutorial part 1 - introduction and installation
7:23
this is part 1 of a tutorial on how to make music with PSPSeq. this part of
the tutorial covers the very basic concepts as well as how to install custom
firmware on your PSP so you can run PSPSeq. if you already have PSPSeq
installed or are familiar with homebrew, there's no need to watch this tutorial.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 2 - the step sequencer
7:18
this is part 2 of the PSPSeq tutorials. in here you'll find out how to:

- move around the step sequencer
- trigger and untrigger notes
- set the trigger probability and volume at various steps in a loop
- a bit about some of the generators and fx in PSPSeq

________________________________________________________________________________
PSPSeq 3.01 tutorial part 3 - the step sequencer, continued
7:34
this is part 3 of the PSPSeq tutorials. in here you'll find out how to:

- set track volume
- set panning for a single step and all steps in a loop
- mute/solo tracks
- modify synth parameters from the step sequencer
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 4 - advanced step sequencer concepts
5:57
this is part 4 of the PSPSeq tutorials. in here you'll find out how:

- synthesis parameters are copied from step to step
- how to use copy and paste in the step sequencer
- how to set a control-only step
- how to quick access the menu system
- how to move between loops in the step sequencer
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 5 - the transport
7:58
this is part 5 of the PSPSeq tutorials. in here you'll learn about
the text on the bottom of the screen and how to access and use the
transport.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 6 - menu system basics, resetting the sequencer and
							  loading songs
9:01
this is part 6 of the PSPSeq tutorials. in here you'll learn how to use the menu
system, start a new song, and how to load and play a song in PSPSeq.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 7 - SAVE, RECORD, VISUALIZE
4:55
this is part 7 of the PSPSeq tutorials. in here you'll learn how to save a song
as a SEQ file or a WAV file and also how to use the visualizer.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 8 - DISPLAY
6:41
this is part 8 of the PSPSeq tutorials. in here you'll find out how to configure
the colors used in PSPSeq and set grid steps to help composing songs that are in
non-standard time signatures.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 9 - CONTROL, ABOUT, HELP menu options
6:42
this is part 2 of the PSPSeq tutorials. in here you'll find out how to configure
the analog pad, access basic information about PSPSeq, and the help menus.
	
________________________________________________________________________________
PSPSeq 3.01 tutorials part 10 - the TEMPO menu
5:43
this is part 10 of the PSPSeq tutorials. in here you'll find out how to change
the tempo, add swing, and set the sequence length.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 11 - TRACK part 1
8:25
this is part 11 of the PSPSeq tutorials. in here you'll find out how to uses the
TRACK menu to copy trigger points, synthesizer data, and clear data from the
sequencer.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 12 - TRACK part 2
5:16
this is part 11 of the PSPSeq tutorials. in here you'll learn more about
clearing a track, as well as shifting synthesizer data and filling steps in a
track.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 13 - LOOP menu
6:02
this is part 13 of the PSPSeq tutorials. in here you'll find out how to use the
LOOP menu to copy data between loops, clear loops, and change the name of loops.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 14 - SONG menu
6:42
this is part 14 of the PSPSeq tutorials. in here you'll find out how to use the
SONG menu to sequence a series of loops to make an entire song.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 15 - CONFIG menu
9:20
this is part 15 of the PSPSeq tutorials. in here you'll learn about the CONFIG
menu options. these set the frequency mode of pitched generators, a simple
stereoizing function, the ability to "humanize" a track, the way the left and
right triggers work for jumping from loop to loop, and the location where WAV
files are recorded.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 16 - editing synths, part 1
8:44
this is part 16 of the PSPSeq tutorials. in here you'll learn about the basics
of changing synthesizer parameters via the EDIT SYNTH menu.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 17 - advanced synth editing options
6:38
this is part 17 of the PSPSeq tutorials. in here you'll learn about using
latched steps to modify a subset of steps in a loop as well as interpolating
values between steps and randomizing synth parameters. important stuff!
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 18 - the BAM generator part 1
9:00
this is part 18 of the PSPSeq tutorials. in here you'll learn about some of the
parameters in the BAM generator. i'll also explain how to create a track which
can be used for demoing a generator or effect very easily.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 19 - the BAM generator part 2
8:38
this is part 19 of the PSPSeq tutorials. this covers some additional paramters
in the BAM generators such as the various waveforms, ringmodulation, and
oscillator syncing.
	
________________________________________________________________________________
PSPSeq 3.01 tutorial part 20 - WARP and pitch bends
7:57
this is part 20 of the PSPSeq tutorials. in here you'll learn about applying a
random low frequency oscillation to the frequency of a generator via the WARP
and WARPWT parameters, as well as how to control pitch bends via EXPMULT and
ENDOFFSET. this is the only place i cover this in detail, so if you are confused
about these parameters, watch this!

________________________________________________________________________________
PSPSeq 3.01 tutorial part 21 - the BFM generator part 1
6:59
this is part 21 of the PSPSeq tutorials. in here you'll learn about some of the
parameters for the BFM generator - an FM synthesizer where both the modulator
and carrier and 2 oscillator BAM generators.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 22 - the BFM generator part 2
9:22
this is part 22 of the PSPSeq tutorials. in here you'll learn more about the BFM
generator; how feedback works and some details on the modulator.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 23 - the BFM generator part 3
9:09
this is part 23 of the PSPSeq tutorials. in here you'll learn about the
modulator envelope for the BFM generator as well as hear some sample sounds.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 24 - the FM generator part 1
7:26
this is part 24 of the PSPSeq tutorials. in this video i go over some of the
basics of the FM synthesizer.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 25 - the FM generator part 2
7:57
this is part 25 of the PSPSeq tutorial videos. in here i go over more details of
the FM generator and play around with the various parameters to give an idea of
what the synthesizer can sound like.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 26  - the KS generator
9:25
this is part 26 of the PSPSeq tutorials. in here you'll learn about the KS
generator which is an enhanced karplus strong plucked string synthesizer for
creating melodic and noisy sounds.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 27  - the N and PSQ generators
7:29
this is part 27 of the PSPSeq tutorials. in here you'll learn about the N and
PSQ generators. N is a white noise generator with configurable sample and hold
while PSQ is a square wave generator with configurable pulse width.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 28  - the ROT generator
3:12
this is part 28 of the PSPSeq tutorials. in here you'll learn about the ROT
generator. this is a rotational synthesizer which performs a binary rotation on
a random value to created a pitched waveform.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 29  - the WAV generator
9:57
this is part 29 of the PSPSeq tutorials. in here you'll learn about the WAV
generator which plays back .WAV files and has special controls for setting loop
points and syncing loops to the song's BPM.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 30  - CLP, DEC, and MSK effects
9:33
this is part 30 of the PSPSeq tutorials. in here you'll learn about the CLP,
DEC, and MSK effects. CLP applies a hard clamper to the audio output, DEC does
sample & hold as well as bit-depth reduction, and MSK applies a binary bitmasker
to the output.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 31  - PCF and RD effects
9:25
this is part 31 of the PSPSeq tutorials. in here you'll learn about the PCF and
RD effects. PCF applies a mathematical transformation on the input and last
output samples to create all sorts of strange sounds while RD reverses the input
so that small samples are large and large samples are small.

________________________________________________________________________________
PSPSeq 3.01 tutorial part 32  - SHP and SVF effects
8:28
this is part 32 of the PSPSeq tutorials. in here you'll learn about the SHP and
SVF effects. SHP is a waveshaper which can compress and distort a generator and
SVF is a traditional audio filter with configurable resonance and cutoff
frequencies.